Accessing User Tools (Copier / Document Server Features)
Accessing User Tools (Copier / Document Server Features)
This section is for key operators in charge of this machine. With User Tools can change the machine's default settings.
Note
❒Be sure to exit User Tools and re- turn to the initial copy display af- ter all settings are finished. This section describes system settings you can set for the copier function.
❒The selected key is highlighted.
❒Any changes you make with User Tools remain in effect even if the main power switch or operation switch is turned off, or the {Clear Modes} key is pressed.
Reference
For details, see “Changing Default Settings” in “User Tools (System Settings)”, General Settings Guide.
C Select the menu you want to set.
The setting display for each menu is displayed.
Reference
See p.99 “User Tools Menu (Copier / Document Server Fea- tures)”.
D Change settings by following the instructions on the display panel, and then press [OK].
5
Exiting User Tools
A After changing default settings, press [Exit] on the User Tools main menu.
Changes to User Tools are com- plete, and the machine is ready to copy.
Changing Default Settings
A Press the {User Tools/Counter} key.
The User Tools main menu ap- pears.
ZFLS110N
B Press [Copier / Document Server Features ].
The Copier / Document Server Features menu is displayed.
Note
❒You can also exit User Tools by pressing the {User Tools/Coun- ter} key.
107