Copying

Note

❒If you press [Suspend] after check-

ing the results, return to step A to adjust the copy settings as necessary. You can change the settings for Staple, Duplex,

Copy Orientation, Stamp, Mar-

2 gin Adjust., and Cover / Slip Sheet. However, depending on the combination of functions, you may not be able to change certain settings.

Changing the number of sets

You can change the number of copy sets during copying.

Note

❒This function can only be used when the Sort function is turned on.

A While "Copying" is displayed, press the {Clear/Stop} key.

B Press [Change Quantity].

C Enter the number of copy sets using the number keys, and then press the {#} key.

Note

❒The number of sets you can en- ter differs depending on when the {Clear/Stop} key is pressed.

D Press [Continue].

Copying starts again.

Stack

Copies can be assembled with each page shifted.

❖Shift Stack

The optional 500-Sheet finisher, 1000-Sheet Finisher or Shift Sort Tray is required to use this func- tion.

This function groups copies of each page in a multi-page original together. Every other page stack is shifted for ease of separation. If shift sort tray is installed, it pro- vides this function by sliding from side to side.

Note

❒You cannot use the bypass tray with this function.

A Press [Stack].

44