Copier Functions

Note

❒You can change the width of the binding margin as follows:

Metric

0–30 mm (increments of 1 mm)

version

 

 

 

Inch

0"–1.2" (increments of 0.1")

G Place the originals, and then press the {Start} key.

Background Numbering

Use this function to have numbers

version

A Press [Edit / Colour Creation].

printed on the background of copies.

2

GCSTMP2E

B Press [Erase / Margin Adj.].

C Press [Margin Adjustment].

D Set a binding margin for the front pages. Press [←] and [→] when setting the left and right margins, and [↓] and [↑] when setting the top and bottom margins.

Note

❒To change the value entered, press [←], [→], [↓], [↑] to set it.

❒If you do not need to specify margins for back side pages, proceed to step F.

E Set a binding margin for back side pages. Press [←] and [→] when setting the left and right margins, and [↓] and [↑] when setting the top and bottom margins.

Note

❒Margins on the back side of the page are possible only when [2 Sided] or [Combine 2 Side] is se- lected.

F Press [OK] 3 times.

Note

❒You cannot use the bypass tray with this function.

❒The default stamp colour is black.

Reference

Related Initial Settings p.116 “Background Numbering”

A Press [Edit / Colour Creation].

B Press [Stamp].

C Press [Background Numbering].

D Enter the number to start counting from with the number keys.

Note

❒To change the entered number, press [Clear] or {Clear/Stop} and enter the new number.

65