Copier Functions

Note

❒You can specify the Stamp Col- our, position, pages to be stamped, and numbering. See “Changing the stamp colour”, “To change the stamp position”, “Specifying the first printing page and start number”.

E After all settings are complete, press [OK].

F Press [OK] twice.

G Place the originals, and then press the {Start} key.

Changing the stamp colour

A Press [Stamp Colour].

B Select the stamp colour, then press [OK].

To change the stamp position

A Press [Change].

B Select the position, and then press [OK].

Specifying the first printing page and start number

If you selected (P1, P2…, -1-,-2-…, P.1, P.2…, 1, 2…, )

Note

2

❒The following explanation uses P1, P2... as an example. The steps are the same for other selections.

A Press [Change] on the right side.

B Press [First Printing Page], then enter the original page number from which to start printing using the number keys, and then press the {#} key.

Note

❒To change the number entered, press [Clear] or the {Clear/Stop} key, and then enter a new number.

C Press [Numbering from / to], enter the number of the page from which to start numbering using the number keys, and then press the {#} key.

73