Settings You Can Change with User Tools

Note

❒Default: Auto

❖Duplex Back Page Stamping Position

You can set the position of the du- plex back page number printed us- ing the Duplex function.

Note

❒Default: Opposite Position

❖Page Numbering in Combine

You can set page numbering when using the Combine and Page Numbering function together.

Note

❒Default: Per Original

❖Stamp on Designated Slip Sheet

You can print the page number on slip sheets when you use the Des- ignate function set to "Copy" and Page Numbering function togeth- er.

❖Stamp Position

P1, P2... Stamp Position: 1/5, 2/5...

Stamp Position: –1–, –2–... Stamp

Position: P.1, P.2. Stamp Position:

1, 2... Stamp Position: 1–1, 1–2...

You can set the position where the stamp is printed.

Press the arrow keys to adjust the position.

❖Superimpose

You can have page numbers print- ed in white where they overlap black parts of the image.

Note

❒Default: No

❖Stamp Colour

You can set the selected priority colour when printing the date.

Note

❒Default: Black

Input/Output

❖Switch to Batch (SADF)

You can select to have the Batch or SADF function displayed when you press [Special Original]. See p.15 “Batch”.

Note

❒ Default: Batch

❖SADF Auto Reset

In SADF mode, an original must be set within a specific time after the

previous original has been fed.

 

You can adjust this time from 3 sec-

 

onds to 99 in 1 second increments.

5

Note

 

❒Default: 5 seconds

❖Rotate Sort: Auto Paper Continue

You can continue copying when paper of the required orientation has run out during rotate-sorting. See p.42 “Rotate Sort”.

Note

❒If you select [No] :

•When paper of the required orientation runs out, the ma- chine stops copying and prompts you to supply copy paper. When you load paper, the machine will continue copying.

❒If you select [Yes] :

•Copying continues using copy paper of a different orienta- tion. The copy job will finish even if the machine is left un- attended.

❒Default: No

119