Ricoh 3224C, 3232C, ISC1024c, ISC1032c Changing a stored program, Deleting a Program, Recalling a Program

Copying

F Press [OK].

When the settings are successfully stored, the program name is displayed on the right side of the registered program number. The display returns to the initial copy display for a while.

2

Changing a stored program

A Check the program settings.

Note

❒To check the contents of a pro- gram, recall it. See p.82 “Recall- ing a Program”.

B Repeat steps A to D of “Storing a Program”.

C Press [Register].

Repeat steps E and F of ”Storing a Program”.

Note

❒When overwritten, the previous program is deleted.

Deleting a Program

A Press the {Program} key.

B Press [Delete].

D Press [Yes].

The program is deleted, and the display returns to the initial copy display.

Recalling a Program

A Press the {Program} key.

B Press [Recall].

C Press the number of the program you want to recall.

The stored settings are displayed.

Note

❒Program numbers displayed with m next to them already have settings.

D Place the originals, and then press the {Start} key.

C Press the number of the program you want to delete.

82