Copying

Reference

Related default settings: p.117 “Stamp Position 1 - 4” p.117 “Stamp Format 1 - 4” p.118 “Stamp Colour: 1 - 4”

2A Press [Edit / Colour Creation].

B Press [Stamp].

C Press [User Stamp].

D Select the stamp number.

E Press [All Pages] or [1st Page Only] to select the print page.

Note

❒You can change the stamp col- our and position. See p.68 “Changing the stamp col - our”.See p.68 “To change the stamp position”.

F After all settings are complete, press [OK].

G Press [OK] twice.

H Place the originals, and then press the {Start} key.

Changing the stamp colour

A Press [Stamp Colour].

B Select the stamp colour, then press [OK].

To change the stamp position

A Press [Change].

B Select the position, and then press [OK].

To program the user stamp

Note

❒The range of stamp images for readability is 10–297 mm high (0.4"–11.7") and 10–432 mm wide (0.4"–17.0"). However, if the value exceeds the maximum area (5,000 mm2, 7.75 inch2), it is automatically adjusted to range.

❒Up to four frequently used images can be stored in memory.

A Make sure the machine's copier function is selected.

B Press the {User Tools/Counter} key.

ZFLS110N

68