Copying
B Press [Edit / Colour Creation].
2
C Press [Colour Creation].
D Press [Convert Colour].
E Select any one item from [Conversion 1] to [Conversion 4].
F Select the colour to be converted.
G Select the new colour to be con- verted.
Note
❒You can adjust the density of each colour in 4 levels.
❒When you want to change the converted colour, press from
[Conversion 1] to [Conversion 4] and make the selection again.
❒When changing between more than two colours, repeat steps E to G.
Selecting from [User Colour]
APress [User Colour].
BSelect from the registered col- ours, then press [OK].
H After selecting all the colours to be converted, press [OK].
I Press [OK] 3 times.
J Place the originals, and then press the {Start} key.
Erase Colour
You can erase a certain colour in the image of the original.
Note
❒It is possible to select up to 4 col- ours.
❒The width of the colour to be delet- ed can be adjusted in 5 levels. If the colour width is set to “Wider” and red has been specified, colours which are close to magenta or or- ange, will also be deleted. The col- our width can be adjusted in the “User Tools”. See p.120 “Colour Sensitivity”
A Press [Edit / Colour Creation].
B Press [Colour Creation].
C Press [Erase Colour].
D Select the colour to be erased.
Note
❒You can cancel the selection by pressing the selected (highlight- ed) key.
❒You can erase 4 colours at once.
30