Copying from the Bypass Tray
F Press [OK] twice.
G Place the originals, and then press the {Start} key.
Important
❒When copying onto OHP trans- parencies, remove copied sheets one by one.
H When your copy job is finished, press the {Clear Modes} key to clear the settings.
When Copying on the Back Side of the Paper
Using the bypass tray, you can make copies on the back of paper which has already been copied on the other side.
Note
❒Do not use paper that has already been copied onto by other equip- ment.
❒Copies made on the back side of the paper should be originals with very little image area, such as text originals.
❒If the paper is curled, straighten it out, and then insert it. If the paper is not straightened out, it can cause paper jams.
Pay attention to the orientation of paper and originals.
❖Top to top
2
GGH03E
❖Top to bottom
25