Colour Functions
When the {Single Colour} key is selected
A Select designation method of colour ( [Basic Colour], [User Colour] ).
B Select the colour, and then press [OK].
Note
❒When copied using the regis- tered colour, the original will be copied lighter than the regis- tered colour.
❒Press [iLighter] or [Darkerj], and you can adjust the density in 4 steps.
When
APress [Change Colour Setting].
BPress [Black Portion], and then select the colour to be replaced by black.
Note | 2 |
| |
❒ When selecting a colour from |
|
the user colours, press [User |
|
Colour]. |
|
C Press
DPress [OK] twice.
When the
A Select either
When [Red & Black] is pressed
APress [OK].
Convert Colours
Copies by changing the colour in the original to a different colour.
Note
❒It is possible to specify up to 4 col- ours.
❒The width of the colour to be con- verted can be adjusted in 5 levels. If the colour width is set to “Wid- er” and red has been specified, col- ours which are close to magenta or orange, will also be converted. The colour width can be adjusted in the “User Tools”. See p.120 “Colour Sensitivity”
A Press the {Full Colour} key.
29