Copier Functions

D Press [OK].

E Place the originals, and then press the {Start} key.

Directional Size Magnification (mm)

A suitable reproduction ratio is automatically selected when you enter the horizontal and vertical lengths of the original and copy image you require.

CP2M01EE

1.Horizontal original size

2.Vertical original size

3.Horizontal copy size

4.Vertical copy size

Preparation

Specify the vertical and horizontal size of the original and that of the copy, as shown.

Note

❒You can enter sizes within the fol- lowing ranges:

Metric

Vertical: 1–999 mm

version

(increments of 1 mm)

 

Horizontal: 1–999 mm

 

(increments of 1 mm)

 

 

Inch

0.1"–99.9" (increments of 0.1")

version

 

 

 

A Press [Reduce / Enlarge].

2

B Press [Specifd. Ratio].

C Press [Dir. Size Mag mm].

D Enter the horizontal size of the original using the number keys, and then press [#].

E Enter the horizontal size of the copy using the number keys, and then press [#].

F Enter the vertical size of the original using the number keys, and then press [#].

G Enter the vertical size of the copy using the number keys, and then press [#].

Note

❒To change the length, press the key you want to change, and then enter the new value.

H Press [OK] twice.

I Place the originals, and then press the {Start} key.

41