Copier Functions
B Press [Stamp].
C Press [Preset Stamp].
D Select the message.
E Press [All Pages] or [1st Page Only] to select the print page.
Note
❒You can change the colour, po- sition, size, and density of the stamp. See p.67 “Changing the stamp colour”. See p.67 “To change stamp position, size, and density”.
F After you have specified all necessary settings, press [OK].
G Press [OK] twice.
H Place the originals, and then press the {Start} key.
Changing the stamp colour
A Press [Stamp Colour].
B Select the stamp colour, then press [OK].
To change stamp position, size, and density
A Press [Change].
B Select the position for print, size, and density, and then press [OK].
User Stamp
Prints a registered stamp onto copies.
GCSTMP0E
Preparation
You have to register a user stamp before using this function. See p.68 “To program the user stamp”.
Stamp position and original orientation
Note
❒You cannot use the bypass tray with this function.
❒Only one message can be stamped at a time.
❒The default stamp colour is black.
2
67