Copying
A Open the bypass tray, and then adjust the guides to the paper size.
B Gently insert the copied paper with the side you want to copy face down until the beeper
|
| sounds. | |
2 | |||
C Press the {#} key. | |||
| |||
| D Select the paper size. | ||
| E Select [Plain: Dup.Back] or [Thick: | ||
|
| Dup.Back]. | |
|
|
| |
|
|
| |
F Press [OK] twice.
G Place the originals, and then press the {Start} key.
When copying onto envelopes
Note
❒When placing an original on the exposure glass, place the original with the bottom line aligned to the left scale.
❒When placing originals in the ADF, place the originals with the bottom line inserted in the ADF.
❒When inserting envelopes, be sure to unfold the flaps and position them opposite to the paper feed di- rection.
ZGHS006E
Reference
For more information about supported size of envelope, see “Recommended Paper Sizes and Types”, General Settings Guide.
A Open the bypass tray, and then insert the envelopes with the side you want to copy face down until the beeper sounds.
B Align the paper guide to the envelope side.
C Press the {#} key.
D Select the paper size, and then select [Thick Paper] for the paper type.
E Press [OK].
F Place the originals, and then press the {Start} key.
G When your copy job is finished, press the {Clear Modes} key to clear the settings.
26