Settings You Can Change with User Tools

❒[With Image Rotation] Use to copy when using the Auto Tray Switching function.

❒[Without Image Rotation] Only copies with Auto Tray Switch- ing if you load paper of the same size and in the same orien- tation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message “Load paper.” is displayed.

❒[Off] When a paper tray runs out of paper, copying is interrupted and the message “Load pa- per.” is displayed.

General Features P.2/5

❖Duplex Mode Priority

You can select the type of the Du- plex function effective when the power is turned on, or modes are cleared.

Note

❒Default:

•Metric version: 1 Sided→1 Sided

•Inch version: 1 Sided→2 Sided

❖Copy Orientation in Duplex Mode

You can set the copy orientation when making two-sided copies.

Note

❒Default: Top to Top

❖Original Orientation in Duplex Mode

You can set the original orientation when making two-sided copies.

Note

❒Default: Top to Top

❖Change Initial Mode

You can select standard mode or Program No.10 as the mode effec- tive when power is turned on, or modes are cleared.

Note

❒Default: Standard

❖Max. Copy Quantity

The maximum copy quantity can be set between 1 and 100.

Note

❒Default: 100 Sheet(s)

❖Tone: Original remains

The beeper (key tone) sounds if

you forget to remove originals af- 5 ter copying.

Note

❒Default: On

❒If Panel Tone in User Tools (Sys- tem Settings) is [Off], the beeper does not sound, whatever the Tone: Original remains setting. See “Panel Tone” in “General Features”, General Settings Guide.

❖Job End Call

You can choose to have the beeper sound when copying is complete.

Note

❒Default: On

❒If Panel Tone of User Tools (Sys- tem Settings) settings is [On], the machine beeps to notify you that it did not complete a job for reasons such as: the paper tray ran out of paper, or a paper jam occurred.

109