
Supplementary Specifications
❖ Duplex
• You cannot use the following copy paper with this function:
• Paper thicker than 105 g/m2, 28 lb.
• Paper thinner than 64 g/m2, 17 lb.
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• When an odd number of originals is placed in the ADF, the back of the last page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
• The following paper sizes can be duplexed: A3L, B4 JISL, A4KL, B5
JISKL, A5KL, 11" ⋅ 17"L, 81/2" ⋅ 14"L, 81/2" ⋅ 13"L, 81/2" ⋅ 11"KL, 81/4" ⋅ 13"L, 8" ⋅ 13"L, 71/4" ⋅ 101/2"L 51/2" ⋅ 81/2"L, 16KKL, 8KL
❖ Combine
• | You cannot use the bypass tray with this function. |
|
• | In this mode, the machine selects the reproduction ratio automatically. |
|
| This reproduction ratio depends on copy paper sizes and the number of |
|
| 6 | |
| originals. |
•The reproduction ratios you can specify are
•If the calculated ratio is under the minimum ratio, it will be automatically adjusted to within acceptable range. However, with some ratios, parts of the image might not be copied.
•You cannot use custom size paper.
•A separation line between originals can be printed with the User Tools. ⇒ p.115 “Separation Line in Combine”
•If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies proper- ly.
•If the number of originals placed is less than the number specified for com- bining, the last page segment will be left blank as shown.
129