2. Copying
Basic Procedure
Preparation
When User Code Authentication is set, the screen for entering a user code will be displayed. Enter your user code using the number keys, and then press the {#} key. For user codes, see "Authentication In- formation", General Settings Guide.
When Basic Authentication, Windows Authentication, or LDAP Authentication is set, the authentication screen will be displayed. Enter your login user name and user password, and then press [Login]. See "When the Authentication Screen is Displayed", General Settings Guide.
A Make sure "d Ready" is shown on the display.
If any other function is displayed, press the {Copy} key.
❖Initial copy display
B Make sure no previous settings remain.
Note
❒When there are previous set- tings remaining, press the {Clear Modes}key before entering your settings.
C Place the originals.
Reference
p.13 “Placing Originals”
D Make the necessary settings.
E Enter the required number of copies using the number keys.
Note
❒The maximum copy quantity that can be set is 100.
F Press the {Start} key.
Copying starts.
Note
❒When placing originals on the exposure glass, press the {#} key after all the originals are scanned.
❒Copies are delivered face down.
Important
❒When Basic Authentication, Win- dows Authentication, or LDAP Authentication is set, always log off when you have finished using the machine to prevent unauthorized users from using the machine.
❖To stop the machine during a multi- copy run
Press the {Clear/Stop} key.
❖To return the machine to the initial condition after copying
Press the {Clear Modes} key.
19