Copier Functions

Preset Reduce/Enlarge

You can select a preset ratio for copy- ing.

Note

❒When making reduced copies from A3 or B4 originals to A4 OHP trans- parencies, set the OHP transparen- cies in tray 1 in the Ldirection and

use the Auto Reduce/Enlarge function. ⇒ p.38 “Auto Reduce /

Enlarge”2

A Press [Reduce / Enlarge].

❖Base Point

The base point of Reduce/Enlarge differs depending on how the orig- inal was scanned. When the origi- nal is placed on the exposure glass, the upper left corner is the base point. When placed in the ADF, the bottom left corner is the base point.

GCKA031e

1.Base point when placed on the ex- posure glass.

2.Base point when placed in the ADF.

Reference

Related default settings:

p.111 “Shortcut R / E”

p.112 “R/E Priority”

Note

❒To select a preset ratio on the in- itial display, press the shortcut reduce/enlarge key, and then proceed to step D.

B Press [Enlarge] or [Reduce].

C Select a ratio, and then press [OK].

D Place originals, and then press the {Start} key.

-Create margin function

Use Create Margin to reduce the image to 93% of original size using the centre as reference. You can assign this function to a shortcut key on the initial display. By combining it with the Reduce/Enlarge function, you can also provide the Reduce/Enlarge copy with a margin.

Reference

Related default settings:

p.110 “Copy Function Key: F1-F5”

p.112 “Ratio for Create Margin”

37