
Copier Functions
Note
❒The paper for slip sheets should be the same size as the copy paper and should be set in the same di- rection.
❒You cannot select the bypass tray for sheet paper to copy the origi- nals.
❒You can specify up to 20 pages.
A Press [Cover / Slip Sheet].
Chapter
The pages you specify with this function will appear on the front of copy sheets.
2
B Press [Desig. / Chapter].
C Press the key to select the chapter number.
D Enter the page number of the original's location you want to copy onto a slip sheet with the number keys, and then press the {#} key.
E To specify another page, repeat steps C to D.
Note
❒To select chapters 11 to 20, press the [T11~20] key.
F When page designation is com- plete, press [OK].
G Press [OK].
H Select the paper tray containing the paper to copy the originals on- to.
I Set originals, then press the {Start} key.
GCSHOW0J
Preparation
Before selecting this function, press the [Dup./Combine/Series] key and select Duplex (1 Sided → 2 Sided) mode or Combine mode.
Note
❒You can specify up to 20 pages.
❒This function can be used only
when you select the Duplex (1 Sided→2 Sided) or Combine func- tion.
A Press [Cover / Slip Sheet].
B Press [Desig. / Chapter].
C Press [Chapter].
D Press the key to select the chapter number.
77