
Colour Balance
Changing the registered settings
A Press the {Adjust/Program Colour}
key.
B Make sure that [Colour Balance] is selected, and then press [Program Colour Balance].
C Select the program number
The registered colour balance is displayed.
D Change the registered settings.
E After the registered settings are changed, press [Program Colour Balance ].
F Press [Program], and then select the program number to be over- written.
G Press [Register].
The settings are changed.
H Press [OK].
Copying with the registered settings
A Press the {Adjust/Program Colour}
key.
B Make sure that [Colour Balance] is selected, and then press [Program Colour Balance].
C Make sure that [Recall] has been selected, and then select the program that you want to use.
D Press [OK].
E Place the originals, and then press the {Start} key.
Note
❒The adjusted settings will be de- leted and the initial values will be reset when either Auto Clear has been performed, when the
{Clear Modes} key has been pressed or when the power has 3 been turned off.
Deleting the registered settings
A Press the {Adjust/Program Colour}
key.
B Make sure that [Colour Balance] has been selected, and then press [Program Colour Balance].
C Press [Delete], and then select the program that you want to delete.
D Press [Yes].
E Press [OK].
85