4. Configuring the Machine Using Utilities
SNMP Tab
SNMP
Item | Description |
|
|
SNMP | Select whether to enable the machine to use SNMP services. |
|
|
Trap |
|
Item | Description |
|
|
Target Trap | Select whether to enable the machine to send traps to the management host |
| (NMS). |
| When disabled, [SNMP Management Host 1] and [SNMP Management |
| Host 2] below become unavailable. |
|
|
SNMP Management | Enter the IP address or host name of a management host. Can contain up to |
Host 1 | 64 characters. |
|
|
SNMP Management | Enter the IP address or host name of a management host. Can contain up to |
Host 2 | 64 characters. |
|
|
Community |
|
Item | Description |
|
|
Get Community | Enter the community name to use for authentication of Get requests. Can |
| contain up to 32 characters. |
|
|
Trap Community | Enter the community name to use for authentication of Trap requests. Can |
| contain up to 32 characters. |
|
|
System |
|
Item | Description |
|
|
Location | Enter the location of the machine. The location entered here is displayed on |
| the main page. Can contain up to 64 characters. |
|
|
Contact | Enter the contact information of the machine. The contact information |
| entered here is displayed on the main page. Can contain up to 64 |
| characters. |
|
|
48
