Ricoh SP 213Nw IP Policy Settings Description, Can contain up to 39 characters, Them, Received

Configuring the IPsec Settings

Item	Description
Status	Displays the status of the IPsec policy as "Active" or "Inactive".

To configure IPsec policies, select the desired IPsec policy, and then click [Change] to open the "IPsec Policy Settings" page. The following settings can be made on the "IPsec Policy Settings" page.

IP Policy Settings

Item	Description
No.	Specify a number between 1 and 10 for the IPsec policy. The number you
	specify will determine the position of the policy in the IPsec Policy List. Policy
	searching is performed according to the order of the list. If the number you
	specify is already assigned to another policy, the policy you are
	configuring will take the number of the earlier policy, and the earlier policy
	and any subsequent policies will be renumbered accordingly.
Activity	Select whether to enable or disable the policy.
Name	Enter the name of the policy. Can contain up to 16 characters.
Address Type	Select IPv4 or IPv6 as the type of IP address to be used in IPsec
	communication.
Local Address	Displays the IP address of this printer.
Remote Address	Enter the IPv4 or IPv6 address of the device with which to communicate.
	Can contain up to 39 characters.
Prefix Length	Enter the prefix length of the Remote Address, using a value between 1 and
	128. If this setting is left blank, "32" (IPv4) or "128" (IPv6) will be
	automatically selected.
Action	Specify how the IP packets are processed from the following:
	• [Allow]: IP packets are both sent and received without IPsec applied to
	them.
	• [Drop]: IP packets are discarded.
	• [Require Security]: IPsec is applied to IP packets that are both sent and
	received.
	If you have selected [Require Security], you must configure [IPsec Settings]
	and [IKE Settings].

53