Samson 5476 manual 1.4Displaying data, Operation

Operation

1.4Displaying data

Measured values, set points, times-of-use, public holidays and vacation periods as well as tem- peratures of the connected sensors and their set points can be retrieved and displayed in the op- erating level.

Proceed as follows:

Select value.

The various datapoints appear one after the other on the display depending on the con- figuration (–> Fig. 11 on page 112).

Outdoor temperature

Temperature at flow sensor VF in heating circuit 1, 2

Temperature at return flow sensor RüF1

Room temperature

Temperature at flow sensor VF1 while DHW is active

Temperature at flow sensor in DHW circuit VF2 – VF3

Temperature at DHW sensor VF2

Temperature at storage tank sensors SF1–SF2

Temperature at return flow sensor in DHW circuit RüF2

Temperature at solar collector sensor CF

Time schedule for heating

, Time schedule for DHW circuit

Public holidays

Vacation periods

Compare the set point or limit with the actual measured temperature.

By pressing the enter key when the time appears on the display, a status alarm of the system bus interface appears when the Modbus operation is active.

If the system bus interface is not used accordingly, PAUSE appears on the display.

10EB 5476 EN