Samson 5476 manual Operation, 1.1Operating elements, Operating keys

Operation

1 Operation

The controller is ready for use with the temperatures and operating schedules preset by the manufacturer.

On start-up, the current time and date need to be set at the controller (–> section 1.5).

1.1Operating elements

The operating controls are located in the front panel of the controller and protected by a Plexi- glas door.

1.1.1 Operating keys

Changeover key (–> Fig. 11 on page 112)

– Press to switch between operating level and configuration level and from configuration level to the parameter level

Reset key

Press to reset accessible parameters to their default settings; the controller must be in the parameter level

Arrow keys (–> Fig. 11 on page 112)

– To scroll within levels

–To change values

–To switch from the parameter level into the configuration level (press both arrow keys simultaneously)

Enter key

– To access levels

–Access parameters and functions to edit them

–Confirm settings

–Display set points in the info level

6EB 5476 EN