Communication

If you wish to use more than 32 devices in line or need to bridge greater distances, make sure repeaters (e.g. TROVIS 5482) are installed to replicate the signal. With 8-bit addressing, a maximum of 246 devices can be addressed and connected to a bus.

!Warning!

You are required to follow the relevant standards and regulations concerning lightning and overvoltage protection on installation.

Function

WE

Configuration

Modem operation

OFF

FB44 = OFF

 

8 bit

8 bit/16 bit

 

 

 

Parameters*

WE

Range of values

Station address

255

1 to 247 ( 8 bit)

 

 

1 to 999 (16 bit)

Baud rate

9600

150 to 9600

* –> Section 9.3 (”Description of communication parameters to be adjusted“)

9.3Description of communication parameters to be adjusted

Station address (ST.-NO)

This address is used to identify the controller in bus or modem mode. In a system, each control- ler needs to be assigned a unique address.

Baud rate (BAUD)

In a bus system, baud rate refers to the transfer speed between control system and controller. In modem mode, baud rate refers to the transfer speed between controller and modem.

The baud rate adjusted at the controller must correspond with the baud rate of the control sys- tem, otherwise no communication can be established.

Cyclical initialization (In)

This parameter defines the period of time for a cyclical issue of the initialization command “ATZ“. The command is not issued during dial-up or when connected. “ATZ“ causes the pro- file 0 to be copied to the active profile, provided the modem parameters have been set and saved in profile 0 using a suitable terminal program.

Dialing pause to the control station (PA)

It is recommendable to pause for approx. 3 to 5 minutes between dialing up to the control sys- tem to avoid a permanent overloading of the telecommunications network. The Dialing pause to the control station defines the interval between 2 dialing attempts.

EB 5476 EN 69

Page 68 Page 70
Page 69
Image 69
Samson 5476 manual Description of communication parameters to be adjusted
Page 68 Page 70

5476 specifications

The Samson 5476 is a high-performance microphone designed for professional audio applications, offering exceptional quality and versatility for various recording environments. Known for its robust build and advanced features, the 5476 is a reliable choice for musicians, broadcasters, and sound engineers.

One of the standout characteristics of the Samson 5476 is its cardioid polar pattern, which effectively isolates the sound source while minimizing background noise. This feature is especially beneficial in live performance settings or during studio recordings where external noise can be a challenge. The microphone’s frequency response ranges from 20 Hz to 20 kHz, making it suitable for capturing a wide variety of sound sources, from deep bass notes to crisp high frequencies.

The 5476 incorporates a dynamic transducer that enhances its durability and reliability, ensuring it can withstand the rigors of frequent use. The built-in shock mount system further reduces handling noise and vibrations, allowing for clearer audio capture. Additionally, the microphone is equipped with a built-in pop filter, which mitigates plosive sounds that can occur during vocal recordings.

This microphone also features a low impedance output, ensuring compatibility with a wide range of mixing consoles and recording interfaces. Users can easily connect the 5476 to XLR inputs, making it straightforward to integrate into any professional audio setup. The microphone’s high output level ensures excellent signal integrity, providing clean and precise audio reproduction.

Another notable technology in the Samson 5476 is its advanced capsule design, which helps to enhance the microphone's sensitivity and transient response. This results in natural-sounding audio, whether it’s used for vocals, instruments, or ambient sounds. The microphone’s construction also includes a durable metal body that can withstand the wear and tear of live performances and frequent handling.

In summary, the Samson 5476 is a versatile and reliable microphone that combines advanced technology with practical features suited for both studio and live environments. Its cardioid pattern, dynamic transducer, low impedance output, and robust build make it a valuable tool for any audio professional looking to achieve high-quality recordings. Whether for vocals, instruments, or broadcasting, the Samson 5476 delivers consistent performance and exceptional sound quality, making it a top choice in its class.
Top Page Image Contents