Samsung Smart Home (applicable models only)
Symptom | Action | |
|
| |
Could not find |
| |
“Samsung Smart | • The Samsung Smart Home app is available on smartphones that | |
Home” on the app | run Android 4.0 (ICS) or higher, or iOS 8.0 or higher. | |
market. |
| |
The Samsung Smart | • The Samsung Smart Home app is available on applicable | |
models only. | ||
Home app fails to | ||
• The old Samsung Smart Refrigerator app cannot connect with | ||
operate. | ||
Samsung Smart Home models. | ||
| ||
The Samsung | • You must log into your Samsung account to use the app. | |
Smart Home app is | • Make sure that your router is operating normally. | |
installed but is not | • If you have not connected your refrigerator to the Samsung | |
connected to my | Smart Home App after the app was installed, you must make | |
refrigerator. | connection using the device registration function of the app. | |
Could not log into | • You must log into your Samsung account to use the app. | |
• If you don’t have a Samsung account, follow the app’s onscreen | ||
the app. | ||
instructions to create one. | ||
| ||
An error message | • Easy Connection may fail due to the distance from your access | |
appears when I | ||
point (AP) or electrical interference from the surrounding | ||
try to register my | ||
environment. Wait a moment and try again. | ||
refrigerator. | ||
| ||
The Samsung |
| |
Smart Home app | • Exit and restart the Samsung Smart Home app, or disconnect | |
is successfully | and reconnect the router. | |
connected to my | • Unplug the power cord of the refrigerator, and then plug it in | |
refrigerator but | again after 1 minute. | |
does not run. |
| |
|
|
Troubleshooting
English 55
|
| ||
|
| ||
|
|
|
|