Samsung DVD-V5600, DVD-V6600 Playing a Sequence Frame by Frame, Searching for a Specific Sequence

Playing a Sequence Frame by Frame

You can

•Stop the cassette at a given frame (image)

•Advance one frame at a time

No sound is heard when playing back frame by frame.

1 Press the :

•ll button to start playing the cassette.

•ll button again to make still mode.

•F.ADV button to advance frame by frame.

•ll button to return to normal playback.

•Vertical stability: When playing back frame by frame, interference may be seen on the screen. Press the TRK ( or ) button to minimize this effect.

Searching for a Specific Sequence

Each time you record a cassette on this DVD- VCR, an “index” is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the index- es are numbered as follows:

		➔
	Prev	Seq. being	Next
etc.	Seq.	played	Seq.		etc.
2	1	1		2

•This DVD-VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.

Playing a Sequence at Variable Speeds

You can vary the playback speed using the Shuttle function (up to nine times the normal speed). Example: You wish to analyse a sports person’s technique, movement by movement.

•No sound is heard when playing a sequence at variable speeds.

1 Press the :

•ll button to start playing the cassette.

•SHUTTLE (<<) button to play the cassette backwards.

•SHUTTLE (>>) button to play the cassette forwards.

2 Each time you press the SHUTTLE button, the speed is changed as shown in the following illustration.

REVERSE	REVERSE	REVERSE		SLOW	SLOW		PLAY	PLAY	PLAY
PLAY	PLAY	PLAY	STILL	MOTION	MOTION	PLAY	X3	X5	X9
X9	X5	X3		X1/10	X1/5

Go To [0:00:00] Stop

Use this feature when you want to search for the 0:00:00 counter position on a cassette. Press the CLEAR button at the point on the tape where you want to set the counter to 0:00:00. The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position.

1 Press the MENU button, then press the  or

button to select FUNC. The Function menu is displayed. Press the OK or  button.

2 Press the  or  button to select VCR Function, then press the OK or  button. The VCR Function menu is displayed with the Go To [0:00:00] selected.

VCR Function

SETUP Go To [0:00:00]

DVD	End Search
VCR	Intro Scan

PROG

FUNC

•It can be displayed simply by pressing the SEARCH button.

3 Press the OK or  button again.

English - 29