Samsung DVD-V6600 Recording a Programme Immediately, Recording a Programme with Automatic Stop

Recording a Programme

Immediately

Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). If you have not done so, refer to pages 16~17.

1 Switch on the television.

2 Insert the video tape in to the VCR deck, with the window visible and the safety tab intact or the opening covered with adhesive tape. The DVD-VCR is switched on automatically.

3 Select the station by pressing the PROG ( or ) button or select the source (AV1, AV2 or AUX) by pressing the INPUT SEL. button for a satellite tuner or external video source. The station number is displayed and the programme can be seen on the television.

4 Select the recording speed by pressing the SPEED button as many times as required (Refer to page 23).

5 Hold down the REC (●) button for a while to start recording.

The record indicator appears on the television and DVD-VCR display. An index is recorded on the tape (Refer to page 29).

6 To stop recording, press the ■ button once.

•If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (Created by a broken safety tab) is overed with adhesive tape.

•If you reach the end of the tape while recording, the cassette rewinds automatically.

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of programmes.Your DVD-VCR stops automatically after the requested length of time.

1 Switch on the television.

2 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. The DVD-VCR is switched on automatically.

3 Select the station to be recorded by pressing the PROG( or ) button or select the source (AV1, AV2 or AUX) by pressing the INPUT SEL. button for a satellite tuner or external video source. The station number is displayed and the programme can be seen on the television.

4 Select the recording speed by pressing the SPEED button as many times as required (Refer to page 23).

5 Hold down the REC (●) button for a while to start recording. The record indicator appears on the television screen and DVD-VCR dis- play. An index is recorded on the tape (Refer to page 29).

6 Press the REC (●) button several times to increase the recording time in:

•30-minute intervals up to four hours.

•1-hour intervals up to nine hours.

The length is displayed on the television dis- plays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD-VCR stops recording auto- matically and power off.

LENGTH 2:30

SET LENGTH :

PRESS REC ●

7 If you wish to cancel the recording before the end, press the STANDBY/ON button.

•If the end of the tape is reached while recording, the recording stops and power off.

24 - English