
To set a camera option:
1.Start the camera. For more information, see "Taking Pictures" on page 87.
2.Press the right softkey for Options.
3.Press the number key corresponding to the desired option.
•
•Flash: Allows you to configure the flash to be Off, On This Shot or Always On.
•Fun Tools: Allows you to select either Fun Frames or Color Tones.
•Fun Frames: Allows you to select a frame around the image before the picture is taken. Press the navigation key left or right to select
the desired frame. Press MENU to select and return to the camera
OK
mode.
•Color Tones: Allows you to select between several different color tones by pressing the navigation key left or right. When you find
the desired tone, press MENU .
OK
•Controls: Allows you to set the Brightness and White Balance for your pictures.
•Brightness: Allows you to set the brightness level. Press the navigation key left or right to increase or decrease the desired brightness.
•White Balance: Allows you to set up the white balance of the camera automatically or manually using the different preset modes. The modes available are:
•Auto: Automatically adjusts the lighting.
•Sunny: Decreases the light sensitivity for taking pictures in full or mostly sunny conditions.
•Cloudy: Increases light sensitivity for taking pictures under cloudy conditions.
•Tungsten: Adjusts the white balance to match inside lighting conditions displayed using common household light bulbs.
•Fluorescent: Adjusts the white balance to match inside lighting conditions displayed using common fluorescent lighting.
•Manual: Allows you to adjust the white balance settings manually.
•Settings: Allows you to change the following camera settings: