Sanyo va-sw3050 instruction manual Operating the Camera, Camera Controller Functions

Operating the Camera

The VA-SW3050 allows you to operate the camera remotely from PC using the camera controller on the screen.

1Click on the video from the camera you want to operate.

A red frame appears around the selected video.

2Click in the tool bar. Displays the camera controller.

5

1

2

3

4

Camera Controller Functions

If the camera is not equipped with panning-tilting functions, certain buttons do not work (only the shaded buttons are usable).

1Control buttons

Changes the camera orientation horizontally and vertically.

Changes the camera orientation diagonally.

Scans the monitored area end to end vertically or horizontally, and stops at the current camera position.

Starts or stops the sequence, auto-panning or tour action mode, respectively.

• The tour action mode is not available for some models.

Displays the configuration menu for the camera.

2Preset position buttons

Applies the registered configuration for camera orientation, zoom status and focusing position.

•Select the number for registered configuration from the pull-down menu and click [GO].

Registers the current camera orientation along with the zoom and focus positions as the preset configuration.

•Select the number to be used for preset configuration from the pull-down menu and click [Memory].

English 17