Installing the VA-SW3050 Software

Start the installation program, and use the interactive dialog boxes to advance the installation.

1Set the supplied installation CD-ROM into the drive.

The installation program starts automatically.

Note:

If the VA-SW3050LITE, which is supplied with the VA-50LAN option board, already has been installed on your PC, uninstall the VA-SW3050LITE before installing the VA-SW3050.

2In the [Welcome to the VA-SW3050 Setup Wizard] dialog, click [Next].

The setup wizard for the VA-SW3050 starts.

3In the [License Agreement] dialog, select the [I accept the agreement] option and click [Next].

Be sure to read the license agreement thoroughly before proceeding the installation.

4In the [License information] dialog, enter the serial number and click [Next].

The serial number is shown on the envelope containing the installation CD-ROM.

Example: 1234-5678-9012-3456

5In the [Select Destination Location] dialog, click [Next].

If you want to change the install destination folder, click [Browse] to select the desired folder.

6Inclickthe[Next].[Select Start Menu Folder] dialog,

If you want to change the Start menu folder, type the new folder name into the box, or select the desired folder from the existing folder list.

English

3

Page 4
Image 4
Sanyo va-sw3050 instruction manual Installing the VA-SW3050 Software, Set the supplied installation CD-ROM into the drive