Sanyo VCC-6974 instruction manual Display will return to the Camera ID Setting screen

USING THE MENU SCREEN

CAMERA ID

4Press the CURSOR (l) button to select “SET” as the POSITION setting (the setting will flash), then press the SET button.

The CAMERA ID SETTING screen will be displayed, and the set camera ID will flash at the position currently set.

5Press the CURSOR (d, c, j or l) button to determine the display position, then press the SET button.

The display will return to the CAMERA ID SETTING screen.

NOTE: If the CAMERA ID is reset (using the menu PRESET setting), its position will also be reset to the default position (right bottom corner).

6When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then press the CURSOR (d or c) button to change BACK to END, and press the SET button.

☞ To return to the previous screen, select BACK then press the SET button.

	CAMERA ID SETTING
CURSOR SET	ABCDEFGHIJKLM
	NOPQRSTUVWXYZ
	0123456789 :-
	CAMERA ID IS	BN1?????
	POSITION	SET p

CURSOR SET

		BN1
CURSOR	SET
	MENU	BACK
	SET
	MENU	END

English 17