Sanyo VCC-6974 instruction manual Weighting, Returning the values to the default settings

USING THE MENU SCREEN AI/BLC•EVAL

4Press the CURSOR (l) button to select the photometry areas (TOP, etc.), and press the CURSOR (d or c) button to set the weighting (numeric value setting).

☞Weighting

•Setting is possible within the range of 0 to 15.

•If set to 0, the light intensity will be ignored, and if set to 15, the light intensity will be measured with no adjustment.

	BLC WINDOW WEIGHTING		BLC WINDOW WEIGHTING
CURSOR	TOP	0	TOP	0
	BOTTOM	0	BOTTOM	0
	LEFT	0	LEFT	0
	RIGHT	0	RIGHT	0
	CENTER[FIX]	15	CENTER[FIX]	15
	PRESET	OFF	PRESET	OFF
	MENU	BACK	MENU	BACK

BLC WINDOW WEIGHTING			BLC WINDOW WEIGHTING
TOP		0	TOP	0
BOT	TOM	0	BOTTOM	0
LEF	T	0	LEFT	0
RIG	HT	0	RIGHT	0
CEN	TER[FIX]	15	CENTER[FIX]	15
PRESET		OFF	PRESET	OFF
MENU		BACK	MENU	BACK

BLC WINDOW WEIGHTING

TOP		0
BOT	TOM	0
LEF	T	0
RIG	HT	0
CEN	TER[FIX]	15
PRESET		OFF
MENU		BACK

Note:

•If using a VIDEO type lens, the center and the edges will each be divided into separate sections so that the weighting for the edges can be set. The larger the value, the more backlight correction is done for that area.

•When using a VIDEO type lens, the ADJUSTMENT FOR BLC (SIZE) setting will be larger than for a DC type lens.

•The ALC volume on the lens should be turned all the way to Av (Average).

•If the backlight correction function does not compensate properly for the conditions, correct using the LEVEL volume on the lens.

☞Returning the values to the default settings

Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then press the SET button.

5When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then press the SET button. The ADJUSTMENT FOR AI screen will be displayed.

ADJUSTMENT FOR BLC

	[BLC LEVEL]
í	------ú------	ü 8

26 English