Sanyo VCC-6974 instruction manual Option settings

USING THE MENU SCREEN

OPTION

OPTION settings

The following settings can be made from the OPTION menu.

AAPERTURE setting:

This adjustment is used when you would like to correct outlines.

BAGC setting:

This automatically amplifies the image signal when filming in slightly dark places so that the picture becomes brighter.

CGAMMA setting:

The GAMMA characteristics can be set to “1” or “0.45”.

DZOOM setting:

A fixed mode and a variable mode are available. In fixed mode, the zoom ratios are set to X2, X4 and X8. In variable mode, the zoom ratio can be changed smoothly. Pan and tilt operations are also available.

EMIRROR setting

The image can be rotated horizontally then vertically or vertically then horizontally.

FRS-485 setting

You can set the communication parameters.

GINITIAL setting:

This returns all settings to the factory default settings (initial values).

1Press the SET button for about 3 seconds. The MAIN MENU screen will be displayed.

2Press the CURSOR (l) button to select the OPTION setting “SET” (the setting will flash), and then press the SET button. The OPTION MENU screen will be displayed.

SET		MAIN MENU
		LANGUAGE	SET	p
		CAMERA ID	OFF
		SYNC	INT
		IRIS	AI	p
		WHITE BALANCE	ATW	p
		SHUTTER	OFF
		MOTION	ON
CURSOR	SET	OPTION	SET	p
		OPTION MENU
		APERTURE	ON	p
		AGC	ON
		GAMMA	ON
		ZOOM	OFF
		MIRROR	OFF	p
		RS-485	SET
		INITIAL	OFF
		MENU	BACK

English 49