USING THE MENU SCREEN

AI/BLC•IRIS LEVEL

Adjust the IRIS LEVEL setting (DC type lens only)

Press the CURSOR (l) button so that the IRIS LEVEL value is flashing, then press the CURSOR (d or c) button to adjust the IRIS LEVEL setting.

The larger the value, the greater the iris level.

Returning the value to the default setting

Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then press the SET button.

When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then press the CURSOR (d or c) button to change BACK to END, and press the SET button.

To return to the previous screen, select BACK then press the SET button.

BLC setting

The following two types of BLC adjustment can be carried out

MULTI (multi-spot photometry):

Brighter sections of the background are masked so that they do not affect photometry detection. Brighter sections of the background are determined on-screen, and they are masked so that they are in a position which do not affect the main subject (such as a person).

Note: If using a VIDEO type lens, the MULTI mode setting cannot be used.

EVAL (5-section photometry):

Photometry and backlight correction are carried out so that the optimum image can be obtained, even if the subject’s background is too bright.

CURSOR

CURSOR SET

ADJUSTMENT FOR AI

LENS TYPE

DC

 

BLC

OFF

SENSE UP

OFF

[IRIS LEVEL]

 

 

í--ú---z------ü

30

MENU

BACK

MENU

END

ADJUSTMENT FOR AI

LENS TYPE

VIDEO

BLC

EVAL p

OFF

English 23

Page 24
Image 24
Sanyo VCC-6974 instruction manual Adjust the Iris Level setting DC type lens only, BLC setting