USING THE MENU SCREEN
MOTION
The following settings can be made from the MOTION menu.
AOperating direction detection function (DIRECTION):
Sets the camera to detect only movement in a certain direction.
BSize setting function (SIZE):
Sets the size of the objects to be detected when movement is being detected.
CMask area setting function (MASKING):
Sets a mask for places where movement is not to be detected.
DSensitivity setting function (SENSITIVITY):
Sets the amount of sensitivity for parameters such as movement, level, light difference and time interval.
EContinuous electronic zoom function for movement detection (ZOOM):
When a doubtful movement is detected, the zoom ratio is set to X2 and any further movement is tracked.
FAlarm interval setting function (INTERVAL):
Sets the amount of time for no output when an alarm is received.
GAlarm signal setting function (ALARM SIGN):
Causes the camera ID to flash when an alarm signal is detected.
Note:
•If the whole background is empty, detection may not be performed properly.
•If the camera is subjected to vibration, incorrect detection may happen.
•Adjusting each item to the optimum setting will improve detection, however there will always be situations where incorrect detection or no detection happens.
•This unit is not desined for theft or fire prevention. No guarantee is given against any accident or damage that may occur.
English 37
