Operations using the camera command Camera button | Sanyo VCC-6974

OPERATIONS USING THE SYSTEM CONTROLLER

Operations using the camera command (CAMERA) button

1Press the INDIVIDUAL button.

2Press the MODE button to select CM.

3Use the numeric buttons to enter the address (camera).

4Press the ENTER button to accept the address, then use the command buttons for subsequent operations.

A: Electronic zoom

1)Zoom (T, W) operations

Press the ZOOM (T) or ZOOM (W) button.

2)Setting and clearing zoom mode

•Press the ZOOM PRESET button then press the “–” button.

The zoom mode will be set and electronic zoom will be canceled.

•Press the ZOOM PRESET button once more then press the “+” button.

Electronic zoom mode will be set.

3)Pan and tilt operations (operation in normal screen mode) If the electronic zoom mode is set to ON, press the J (q, s or t) button. The focus will return to the center of the screen when the 0 button is pressed.

B: Iris level operations

If using a DC-type auto-iris lens, the iris opening can be controlled. If using a video-type or manual-type auto-iris lens, no operation can be carried out.

1)Lens iris opening

Press the IRIS+ button to open the iris, and press the IRIS– button to close the iris.

2)Returning the iris to the initial opening setting Press the IRIS+ and IRIS– buttons simultaneously.

3)Error information when using a video-type auto-iris lens or when the camera iris setting is EI mode

An Error display will appear on the menu screen of the controller.

B C D E

2 1

A

3

4

60 English

Image 61

Sanyo VCC-6974 instruction manual Operations using the camera command Camera button, Electronic zoom, Iris level operations

Contents

Propos de ce manuel About this manual Features Contents For the customers in Canada Information to UserPour la clientèle canadienne Precautions Video output connector Video OUT BNC type Power indicator PowerAlarm output terminal ALARM, C, a Parts Names Lens iris output connector Lens Camera setup section under the coverMenu setting button SET Cursor button Cursor Lens mount cap Concerning AUTO-IRIS Lenses If using a Video type auto-iris lensDC type auto-iris lens Video type auto-iris lens Remove the lens mount cap from the camera Mounting the LensMount type lens Flange-back adjustment Rewiring the lens cable in the lens iris plug Basic connection for monitoring or recording ConnectionsCoaxial cable type and maximum length Connection to a VCR RS-485 terminal connectionsConnection to a multiplexer Remote controller circuit connections About the Alarm output terminalPreset will return to the zoom pan, tilt center position Using the Cursor button Using the Menu ScreenSwitching to sub-menu screens Switching to the Main Menu screen Using the Menu Screen Then press the SET button Language setting Example To set the camera ID to BN1 Camera ID settingDetermining the start position for character input Changing the camera ID to a new ID Display will return to the Camera ID Setting screen Internal synchronization INT Sync settingsExternal sync VBS Power supply synchronization setting L L External sync setting VBS Menu Back END AI Auto Iris mode setting Iris settingLens Type setting BLC setting Adjust the Iris Level setting DC type lens only AI/BLCMULTI BLC Window Weighting screen will be displayed BLC/EVAL 5-section photometry mode setting Returning the values to the default settings Weighting EI Electronic Iris mode setting Sense UP settingPress the Cursor l, then d or c button until EI Automatic color temperature tracking setting ATW White Balance settingManual white balance MWB White BALANCE/ATWMASKING Masking setting Menu Back END Press and hold the SET button Push-lock white balance adjustment AWC Manual white balance setting MWB Short mode Short Electronic Shutter settingLong exposure mode Long For Short mode When Motion is set to ON, Long mode cannot be selected For Long mode Iris Sense UP mode has been set. Refer to Motion settingExample Mask area setting function Masking Size setting function SizeSensitivity setting function Sensitivity Alarm interval setting function Interval Üü, íí, óó, ññ Direction setting V vertical value is flashing, then press the Cursor c button Size setting Motion Size display table Returning to the default setting MOTION/MASKING Menu Back END This sets the movement amplitude of subjects on the screen Sensitivity settingMaximum MOTION/ZOOM, Interval Zoom setting Alarm Sign setting Interval setting Camera ID flashes on-screen when a movement is detected Image is zoomed in when a movement is detectedChecking the detected movements set by the Motion item Active Move Differ Option settings Aperture setting Gamma setting AGC setting Panning For FIX mode OPTION/FIXI Tilt Returning to the default settings Zooming For VAR mode OPTION/VAR ZOOM, Tilt RS-485 setting Mirror setting Terminate setting Address settingAbout SW No SET button Initial setting Operations using the camera Menu screens Operations Using the System Controller Electronic zoom Operations using the camera command Camera buttonIris level operations Backlight correction settings Setting the Sense UP and electronic shutterWhite balance and AWC-LOCK settings 4321 Menu Display Menu Display No picture on the monitor screen TroubleshootingPicture is not clear Camera Specifications Dimensions mm Accessories Exclusions