Manuals / Sanyo / Photography / Security Camera

Sanyo VCC-6974 instruction manual External sync setting VBS

Models: VCC-6974

1 68

Download 68 pages 49.73 Kb

Page 21

USING THE MENU SCREEN

SYNC/VBS

CExternal sync setting (VBS)

1 Connect the output signal from the other camera to the external sync input connector of this camera.

The SYNC setting in the MAIN MENU screen will change to VBS.

2 Press the CURSOR (l) button to select the SYNC setting “VBS” (the setting will

flash), then press the SET button.

CURSOR

SET

The ADJUSTMENT FOR VBS screen will be displayed.

3The H (horizontal) value will flash. Press the CURSOR (d or c) button to adjust the horizontal sync phase.

Note: If not using a camera (for the output signal), use a sync signal generator.

4Press the CURSOR (l) button until the SC1 (sub-carrier) value is flashing, then press the SET button to select the color phase (SC1 to SC4).

5Press the CURSOR (d or c) button to make fine adjustments to the color phase.

☞Returning the value to the default setting

Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then press the SET button.

MAIN MENU
LANGUAGE	SET	p
CAMERA ID	OFF
SYNC	VBS	p

ADJUSTMENT FOR VBS
	[PHASE]
H íú	-----z------	ü	32
SC1ú------	z------	ü	1

SC1 ➞ SC2 ➞ SC3 ➞ SC4

20 English

Image 21

Sanyo VCC-6974 instruction manual External sync setting VBS

Contents

Propos de ce manuel About this manual Features Contents Information to User For the customers in CanadaPour la clientèle canadienne Precautions Video output connector Video OUT BNC type Power indicator PowerAlarm output terminal ALARM, C, a Parts Names Lens iris output connector Lens Camera setup section under the coverMenu setting button SET Cursor button Cursor Lens mount cap Concerning AUTO-IRIS Lenses If using a Video type auto-iris lensDC type auto-iris lens Video type auto-iris lens Mounting the Lens Remove the lens mount cap from the cameraMount type lens Flange-back adjustment Rewiring the lens cable in the lens iris plug Connections Basic connection for monitoring or recordingCoaxial cable type and maximum length RS-485 terminal connections Connection to a VCRConnection to a multiplexer About the Alarm output terminal Remote controller circuit connectionsPreset will return to the zoom pan, tilt center position Using the Cursor button Using the Menu ScreenSwitching to sub-menu screens Switching to the Main Menu screen Using the Menu Screen Then press the SET button Language setting Example To set the camera ID to BN1 Camera ID settingDetermining the start position for character input Changing the camera ID to a new ID Display will return to the Camera ID Setting screen Sync settings Internal synchronization INTExternal sync VBS Power supply synchronization setting L L External sync setting VBS Menu Back END Iris setting AI Auto Iris mode settingLens Type setting BLC setting Adjust the Iris Level setting DC type lens only AI/BLCMULTI BLC Window Weighting screen will be displayed BLC/EVAL 5-section photometry mode setting Returning the values to the default settings Weighting Sense UP setting EI Electronic Iris mode settingPress the Cursor l, then d or c button until EI White Balance setting Automatic color temperature tracking setting ATWManual white balance MWB White BALANCE/ATWMASKING Masking setting Menu Back END Press and hold the SET button Push-lock white balance adjustment AWC Manual white balance setting MWB Electronic Shutter setting Short mode ShortLong exposure mode Long For Short mode When Motion is set to ON, Long mode cannot be selected For Long mode Motion setting Iris Sense UP mode has been set. Refer toExample Mask area setting function Masking Size setting function SizeSensitivity setting function Sensitivity Alarm interval setting function Interval Üü, íí, óó, ññ Direction setting V vertical value is flashing, then press the Cursor c button Size setting Motion Size display table Returning to the default setting MOTION/MASKING Menu Back END Sensitivity setting This sets the movement amplitude of subjects on the screenMaximum MOTION/ZOOM, Interval Zoom setting Alarm Sign setting Interval setting Image is zoomed in when a movement is detected Camera ID flashes on-screen when a movement is detectedChecking the detected movements set by the Motion item Active Move Differ Option settings Aperture setting Gamma setting AGC setting Panning For FIX mode OPTION/FIXI Tilt Returning to the default settings Zooming For VAR mode OPTION/VAR ZOOM, Tilt RS-485 setting Mirror setting Address setting Terminate settingAbout SW No SET button Initial setting Operations using the camera Menu screens Operations Using the System Controller Operations using the camera command Camera button Electronic zoomIris level operations Setting the Sense UP and electronic shutter Backlight correction settingsWhite balance and AWC-LOCK settings 4321 Menu Display Menu Display Troubleshooting No picture on the monitor screenPicture is not clear Camera Specifications Dimensions mm Accessories Exclusions