USING THE MENU SCREEN

SYNC/VBS

6When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then press the CURSOR (d or c) button to change BACK to END, and press the SET button.

To return to the previous screen, select BACK then press the SET button. Note:

If not using a camera to input the sync signal, use a sync signal generator, and input the VBS signal from the sync signal generator to the external input. Settings such as INT in the SYNC item will change automatically to VBS.

When adjusting the horizontal sync phase, you must use an oscilloscope with a dual trace function.

CURSOR SET

MENU

MENU

BACK

END

English 21

Page 22
Image 22
Sanyo VCC-6974 instruction manual Menu Back END