USING THE MENU SCREEN

SYNC/L-L

BPower supply synchronization setting (L - L)

When using a camera switcher to connect 2 cameras or more to one monitor, there may be a vertical roll of the images when switched. In such a case, set as described below.

1Press the CURSOR (l, then d or c) button to change the SYNC setting to “L - L” (the setting will flash), then press the SET button.

The ADJUSTMENT FOR L - L screen will be displayed.

2Switch the display on the monitor from camera 1 to camera 2.

Press the CURSOR (d or c) button to adjust the vertical sync phase.

Returning the value to the default setting

Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then press the SET button.

CURSOR SET

PRESET ON

OFF

3When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then press the CURSOR (d or c) button to change BACK to END, and press the SET button.

To return to the previous screen, select BACK then press the SET button.

Note: Power supply synchronization setting is not possible when a 12 V DC power supply is being used.

CURSOR SET

CURSOR

CURSOR SET

 

MAIN MENU

 

LANGUAGE

 

SET

p

CAMERA ID

 

OFF

 

SYNC

 

L-L

p

ADJUSTMENT

 

FOR L-L

 

 

 

 

 

 

[V SYNC

 

PHASE]

 

 

í ú z-- --- ------

ü 110

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU

BACK

MENU

END

English 19

Page 20
Image 20
Sanyo VCC-6974 instruction manual Power supply synchronization setting L L