Sanyo VCC-6974 Setting the Sense UP and electronic shutter, Backlight correction settings

OPERATIONS USING THE SYSTEM CONTROLLER

C: Setting the SENSE UP and electronic shutter

1)If the SHUTTER setting in the camera’s main menu is set to LONG or SHORT, you can change the SHUTTER SPEED setting.

•Press the ELS button, then press the “+” button to turn on the electronic shutter.

•Press the ELS button, then press the “–” button to turn off the electronic shutter.

2)If the SHUTTER setting in the camera’s main menu is set to OFF, you can change the SENSE UP setting.

•Press the ELS button, then press the “+” button to turn on the SENSE UP setting.

•Press the ELS button, then press the “–” button to turn off the SENSE UP setting.

Note:

•If the SENSE UP zoom ratio setting has not been changed, then the zoom ratio will be set to the factory default setting, which is X8.

•If the MOTION setting is at ON, the electronic sensitivity (SENSE UP) will not operate.

•If the SHUTTER item SHORT and LONG settings default values have not been changed, the SHORT setting will be 1/100S and the LONG setting will be X8.

D: Backlight correction settings

1)Turning backlight correction on

Press the BLC button then press the “+” button.

2)Turning backlight correction off

Press the BLC button then press the “–” button.

If the BLC setting has not been changed, then the mode will be set to EVAL mode when the backlight correction is turned on.

E: White balance and AWC-LOCK settings

1)White balance lock

Press the AWC SET button.

2)Returning to the white balance mode previously active Press the AWC RESET button.

English 61