Sync settings, Internal synchronization INT | Sanyo VCC-6974

USING THE MENU SCREEN

SYNC/INT

SYNC settings

The following three types of synchronization settings can be carried out.

AInternal synchronization (INT)

Generates a sync signal for internal camera use.

BPower supply synchronization (L - L: line-lock) Matches the vertical sync signal for the camera with the frequency of the AC power supply.

CExternal sync (VBS)

Matches the camera’s sync signal with the sync signal from an external source.

AInternal synchronization setting (INT) 1 Press the SET button for about 3 seconds.

The MAIN MENU screen will be displayed.

2Press the CURSOR (l, then d or c) button to change the

SYNC setting to “INT” (the setting will flash).

3When finished:

Press the CURSOR (l) button until END is flashing at the bottom of the screen, then press the SET button.

The display will return to the monitor screen.

SET		MAIN MENU
SET
		LANGUAGE	SET p
		CAMERA ID	OFF
		SYNC	INT
	CURSOR	SET
		SET
		MENU	END

18 English

Image 19

Sanyo VCC-6974 instruction manual Sync settings, Internal synchronization INT, External sync VBS

Contents

Propos de ce manuel About this manual Features Contents For the customers in Canada Information to UserPour la clientèle canadienne Precautions Parts Names Power indicator PowerVideo output connector Video OUT BNC type Alarm output terminal ALARM, C, a Cursor button Cursor Camera setup section under the coverLens iris output connector Lens Menu setting button SET Lens mount cap Video type auto-iris lens If using a Video type auto-iris lensConcerning AUTO-IRIS Lenses DC type auto-iris lens Remove the lens mount cap from the camera Mounting the LensMount type lens Flange-back adjustment Rewiring the lens cable in the lens iris plug Basic connection for monitoring or recording ConnectionsCoaxial cable type and maximum length Connection to a VCR RS-485 terminal connectionsConnection to a multiplexer Remote controller circuit connections About the Alarm output terminalPreset will return to the zoom pan, tilt center position Switching to the Main Menu screen Using the Menu ScreenUsing the Cursor button Switching to sub-menu screens Using the Menu Screen Then press the SET button Language setting Changing the camera ID to a new ID Camera ID settingExample To set the camera ID to BN1 Determining the start position for character input Display will return to the Camera ID Setting screen Internal synchronization INT Sync settingsExternal sync VBS Power supply synchronization setting L L External sync setting VBS Menu Back END AI Auto Iris mode setting Iris settingLens Type setting BLC setting Adjust the Iris Level setting DC type lens only AI/BLCMULTI BLC Window Weighting screen will be displayed BLC/EVAL 5-section photometry mode setting Returning the values to the default settings Weighting EI Electronic Iris mode setting Sense UP settingPress the Cursor l, then d or c button until EI Automatic color temperature tracking setting ATW White Balance settingManual white balance MWB White BALANCE/ATWMASKING Masking setting Menu Back END Press and hold the SET button Push-lock white balance adjustment AWC Manual white balance setting MWB Short mode Short Electronic Shutter settingLong exposure mode Long For Short mode When Motion is set to ON, Long mode cannot be selected For Long mode Iris Sense UP mode has been set. Refer to Motion settingExample Alarm interval setting function Interval Size setting function SizeMask area setting function Masking Sensitivity setting function Sensitivity Üü, íí, óó, ññ Direction setting V vertical value is flashing, then press the Cursor c button Size setting Motion Size display table Returning to the default setting MOTION/MASKING Menu Back END This sets the movement amplitude of subjects on the screen Sensitivity settingMaximum MOTION/ZOOM, Interval Zoom setting Alarm Sign setting Interval setting Camera ID flashes on-screen when a movement is detected Image is zoomed in when a movement is detectedChecking the detected movements set by the Motion item Active Move Differ Option settings Aperture setting Gamma setting AGC setting Panning For FIX mode OPTION/FIXI Tilt Returning to the default settings Zooming For VAR mode OPTION/VAR ZOOM, Tilt RS-485 setting Mirror setting Terminate setting Address settingAbout SW No SET button Initial setting Operations using the camera Menu screens Operations Using the System Controller Electronic zoom Operations using the camera command Camera buttonIris level operations Backlight correction settings Setting the Sense UP and electronic shutterWhite balance and AWC-LOCK settings 4321 Menu Display Menu Display No picture on the monitor screen TroubleshootingPicture is not clear Camera Specifications Dimensions mm Accessories Exclusions