Sanyo VCC-6974 instruction manual Specifications, Camera

Electronic shutter

SPECIFICATIONS

Camera:

Scanning system	:	NTSC standard TV system (525 TV lines,
Interlace	:	30 frames/sec.)
		PLL 2:1 interlace
Image device	:	1/3 inch solid state image device CCD
Picture elements	:	811 (H) x 508 (V)
Effective picture elements	:	768 (H) x 494 (V)
Synchronizing system	:	Internal sync, Line lock sync switchable,
Resolution	:	External sync
		470 TV lines horizontally, 350 TV lines
		vertically

: 8 speeds, selectable by setting

•SHORT: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.

•LONG: X1, X2, X4, X8, X16, X32

Electronic sensitivity	:	AUTO/OFF, up to X32
Electronic zoom	:	ON/OFF
		Continuance, up to X8
		Fix, X2/X4/X8
Motion detector	:	Pan/tilt operation
		ON/OFF
		Alarm out: 2 pin terminal and RS-485
		bus line

Video output level Video S/N ratio

Minimum required illumination (incandescent lighting)

Backlight compensation

:1.0 Vp-p/75 ohms, composite

:More than 48 dB

:Approx. 0.05 lux with a F 1.2 lens (32X electronic sensitivity),

Approx. 1.4 lux with a F 1.2 lens (normal mode)

:ON/OFF setting, Multi-zone light measuring system (Active when using an auto-iris lens)

AGC	:	ON/OFF
Gamma	:	ON/OFF (γ = 1)
Mirror image effect	:	H, V, H/V, 3 mode reverse image
Camera ID	:	ON/OFF, up to 8 characters
Communication	:	RS-485, operation via SSP
Lens mount	:	CS mount (or C mount with the
Environmental conditions	:	supplied adaptor)
		Temperature: –10˚C ~ +50˚C
		Humidity: less than 90% (no

Iris function	:	Manual ON/OFF switching
Electronic iris range	:	1.4 lux to 70,000 lux (F 1.2, lens: color
		mode)
		2.0 lux to 100,000 lux (F 1.4, lens: color
		mode)
Flange-back	: 12.5 mm ± 0.5 mm
White balance	:	ATW/AWC/MWB setting

		condensation)
Power supply	: 24 V AC/12 V DC, 60 Hz
Power consumption	:	24 V AC :
		3.7	W (with auto-iris lens)
		3.1	W (without auto-iris lens)
		12 - 15 V:
		4.0	W (with auto-iris lens)
		2.9	W (without auto-iris lens)
Weight	:	Approx. 470 g (without lens)

English 65