USING THE MENU SCREEN

WHITE BALANCE/ATW

WHITE BALANCE setting

The following three types of white balance adjustment can be carried out.

AAutomatic color temperature tracking (ATW: Auto Trace White balance)

This makes adjustments automatically so that the same colors can be obtained even if the illumination level changes.

BPush-lock white balance (AWC: Auto White balance Control)

One-push automatic white balance setting is possible. This is used mainly when the ATW setting does not reproduce faithful colors. Refer to page 31.

CManual white balance (MWB)

This lets you make fine adjustments to the color as desired. It can be used when the optimum color reproduction cannot be obtained by using ATW. Refer to page 32.

AAutomatic color temperature tracking setting (ATW)

1 Press the SET button for about 3 seconds. The MAIN MENU screen will be displayed.

2Press the CURSOR (l, then d or c) button to change the

WHITE BALANCE setting to “ATW” (the setting will flash).

3When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then press the CURSOR (d or c) button to change BACK to END, and press the SET button.

To return to the previous screen, select BACK then press the SET button.

SET

 

MAIN MENU

 

 

 

LANGUAGE

SET

p

 

CAMERA ID

OFF

 

 

SYNC

INT

 

CURSOR

IRIS

AI

p

WHITE BALANCE

ATW

p

CURSOR SET

MENU

BACK

MENU

END

28 English

Page 29
Image 29
Sanyo VCC-6974 White Balance setting, Automatic color temperature tracking setting ATW, Manual white balance MWB