USING THE MENU SCREEN

OPTION/VAR ZOOM, TILT

TILTING:

Press the CURSOR (l) button to select the TILT setting “UP” (the setting will flash), then press and hold the SET button. The picture will tilt upward.

Press the CURSOR (c) button to select the TILT setting “DOWN” (the setting will flash), then press and hold the SET button. The picture will tilt downward.

Returning the values to the default settings

Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then press the SET button.

When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then press the CURSOR (d or c) button to change BACK to END, and press the SET button.

To return to the previous screen, select BACK then press the SET button.

Note:

The maximum zoom ratio in VAR mode is the current zoom ratio setting in FIX mode.

When ZOOM in the OPTION MENU has been set to ON, the PAN and TILT settings will automatically change to the settings which were last made.

If the ZOOM item in the OPTION MENU is set to “ON”, while a normal screen is displayed, simply press the CURSOR buttons for pan and tilt operations.

Note:

This will operate if a setting (5S to 5M) is made for the ZOOM item in the ADJUSTMENT FOR MOTION menu. If a subject movement is detected and the ZOOM function operates (the pan and tilt operations being also included), the CURSOR buttons manual pan and tilt operations will not be possible.

The ZOOM function enlarges a portion of the image, resulting in a lower on-screen resolution.

CURSOR SET

TILT UP DOWN

CURSOR SET

MENU

BACK

MENU

END

English 55

Page 56
Image 56
Sanyo VCC-6974 instruction manual OPTION/VAR ZOOM, Tilt