OPERATION PANEL
(1) | (2) | (3) | (4) | (5) |
HOME
SYSTEM
SETTINGS
READY
DATA
LINE
IMAGE SEND
DATA |
|
JOB STATUS | LOGOUT |
|
(6) (7) (8)
(1)Touch panel
Messages and keys appear in the touch panel display. Touch the displayed keys to perform a variety of operations.
When a key is touched, a beep sounds and the selected item is highlighted. This provides confirmation as you perform an operation.
☞TOUCH PANEL (page 12)
(2)[HOME] key
Touch this key to display the home screen. Frequently used settings can be registered in the home screen to enable quick and easy operation of the machine.
☞HOME SCREEN (page 23)
(3)[SYSTEM SETTINGS] key
Press this key to display the system settings menu screen. The system settings are used to configure paper tray settings, store addresses for transmission operations, and adjust parameters to make the machine easier to use.
☞System Settings Guide
(4)Numeric keys
These are used to enter the number of copies, fax numbers, and other numerical values.
(5)[CLEAR] key (
)
Press this key to return the number of copies to "0".
(6)PRINT mode indicators
•READY indicator
Print jobs can be received when this indicator is lit.
•DATA indicator
This blinks while print data is being received and lights steadily while printing is taking place.
(7)IMAGE SEND mode indicators
•LINE indicator
This lights up during transmission or reception of a fax or Internet fax. This also lights during transmission of an image in scan mode.
•DATA indicator
This blinks when a received fax or Internet fax cannot be printed because of a problem such as out of paper. This lights up when there is a transmission job that has not been sent.
(8)[JOB STATUS] key
Press this key to display the job status screen. The job status screen is used to check information on jobs and to
cancel jobs.
10