Press the [BLACK & WHITE START] key ().

Scanning begins.

• If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep will sound to indicate that scanning is finished.

• If you are scanning the original on the document glass, scan each page one page at a time.

When scanning finishes, place the next original and press

the [BLACK & WHITE START] key ( ). Repeat until all

6pages have been scanned and then touch the [Read-End] key.

A beep will sound to indicate that scanning is finished.

The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan size, and send size. (However, when scanning each even-numbered page of the original, only the exposure can be changed.)

To cancel scanning...

Press the [STOP] key ( ).

• Transmission is not possible at a size smaller than the original size.

• This function cannot be used in direct transmission mode or when the speaker is used to dial.

•The 2in1 function cannot be used when the original is other than 8-1/2" x 11" (A4) or 5-1/2" x 8-1/2" (B5 or A5) size.

•When the scan size of the original is specified by numerical values, this function cannot be used.

To cancel 2in1...

Touch the [2in1] key in the screen of step 2 so that it is not highlighted.

75