Load the tab paper.

Reverse side

• When using the bypass tray, place the paper with the print

 

side down.

 

Place the paper so that the sides with the tabs enter the

 

machine last.

 

After loading the tab paper, configure the bypass tray

4

settings as explained in "MAKING COPIES USING THE

BYPASS TRAY" (page 41).

• If you are using tray 3, see "Loading tab paper" in the User's Guide. After loading tab paper in tray 3, select tray 3 as explained in "PAPER TRAYS" (page 14).

The width of the tab paper can be as wide as 8-1/2" x 11" paper (8-1/2") plus 5/8" (or A4 width (210 mm) plus 20 mm).

or

5

To cancel scanning and copying...

Press the [STOP] key ( ).

Press the [COLOR START] key () or the [BLACK & WHITE START] key

().

Copying will begin.

If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.)

To cancel tab copy...

Touch the [Cancel] key in the screen of step 3.

System Settings (Administrator): Initial Tab Copy Setting

The default image shift width can be set from 0" to 5/8" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".

82