INSERTER
The inserter enables blank sheets or printed sheets to be added to copy and print output as covers or inserts without performing printing. The inserter also allows feeding of heavy paper that cannot be fed from the other trays.
Sets of printed paper that have not been stapled or punched can be fed one at a time from the inserter for stapling or punching.
☞MANUALLY OPERATING THE INSERTER (page 60)
To use the inserter to insert covers or inserts, paper settings for the inserter must be configured in "Paper Tray Settings" in the system settings.
PART NAMES
(1) (2) (3) (4)
(5)
(1)Paper tray
Place blank or printed paper here to be inserted.
(2)Paper guide
When loading paper, adjust this guide to the width of the paper.
(3)Top cover
Open this cover to remove a paper misfeed.
(4)Inserter operation panel
Stapling and punching can be performed directly from the inserter operation panel without using the machine operation panel.
(5)Paper guide lever
Release the paper guide lock to remove misfed paper.
To install an inserter, a finisher or saddle stitch finisher is required. To install an inserter on a finisher, a punch module is required.
Special media that can be used in the inserter
Special media such as heavy paper up to 61 lbs. (256 g/m2), transparency film, tab paper, or thin paper can be loaded in the inserter. For detailed information on paper, see the Safety Guide.
58