1 BEFORE USING THE MACHINE

This chapter provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

(1)

(2)

(3) (4)

(5)

(6)

(7) (8)

(9)

When a finisher is installed

(1)Finisher / saddle stitch finisher*

This can be used to staple output. The saddle stitch finisher can automatically staple output at the center line and fold the pages to create a pamphlet.

☞FINISHER / SADDLE STITCH FINISHER (page 49)

(2)Punch module*

This is used to punch holes in output.

☞PUNCH MODULE (page 57)

(3)Inserter*

Paper loaded in the inserter can be inserted into output from the machine as covers and inserts.

☞INSERTER (page 58)

(4)Automatic document feeder

This automatically feeds and scans multiple originals. Both sides of 2-sided originals can be automatically scanned.

☞PLACING THE ORIGINAL (page 44)

* Peripheral device.

When a finisher / saddle stitch finisher is not installed

(5)Front cover (upper)

Open this to replace a toner cartridge or clear a paper misfeed from the paper pass unit.

☞REPLACING THE TONER CARTRIDGES (page 74)

(6)Front cover (lower)

Open this to switch the main power on and off.

☞TURNING THE POWER ON AND OFF (page 16)

☞5. MAINTENANCE (page 65)

(7)Operation panel

This is used to select functions and enter the number of copies.

☞OPERATION PANEL (page 10)

(8)Right Tray

Output can be delivered to this tray.

(9)Output tray (center tray) Output is delivered to this tray.

5