Sharp MX-7001 manual 294

ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)

The erase function is used to erase shadows on images produced when scanning thick originals or books.

(This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.)

Scanning a thick book

Not using the erase		Using the erase
	function		function

Shadows appear here.

Shadows appear in the image. No shadows appear.

Erase modes

Edge Erase

This erases shadows that appear at the edges of the image when thick originals or books are faxed.

Center Erase	Edge + Center
This erases shadows	Erase
at the bindings of	This erases shadows
books or other bound	at both the edges
documents.	and the binding.

1	Place the original.
	Place the original face up in the document feeder tray, or face down on the document glass.
	Select the special modes.
2	(1)	Touch the [Special Modes] key.
	(2)	Touch the [Erase] key.

☞Special modes menu (1st screen) (page 60)

			(1)			(2)					(3)
	Fax/Special Modes										OK
	Erase						Cancel				OK
3
		Edge	Center	Edge+Center
								Edge
		Erase	Erase		Erase
									1/2
										(0~1)
										inch

Select the erase settings.

(1) Touch the desired erase mode.

Select one of the three erase modes.

(2) Set the erasure width with the keys.

0" to 1" (0 mm to 20 mm) can be entered.

(3) Touch the [OK] key.

65